.
Product Name: fl102-sd sanitary gauge pressure transmitter
Product No.: 105823-734
Product model: fl102-sd
Updated on: September 14, 2017
Production unit: [thermocouple] - Shanghai Feilong instrument and Electrical Co., Ltd. 021-63801621
Product details
Fl102 / 3-D sanitary gauge / absolute pressure transmitter is used to measure the liquid level, density and pressure of liquid, gas or steam, and then convert it into current signal output of 4 ~ 20mADC.
Standard Specification (adjust the range based on the standard zero point, stainless steel 316L diaphragm, and the filling liquid is silicone oil)
1. Performance specifications
Reference accuracy of range adjustment: ± 0.25%
Return difference: ≤ 0.15% F.S
Repeatability: ≤ 0.15% F.S
Zero drift: < 0.15% F.S
Thermal hysteresis: < 0.1% F.S
Impact of ambient temperature
Temperature compensation range: 0 ~ 80 ℃;
Zero point: < 0.025% ℃
Range < 0.025% ℃
Over range impact: ± 0.15% xspan
Stability: ± 0.5% xspan / 3 years
Power supply impact: ± (0.005% / 10V (12-42v DC)
2. Functional specifications
Range and range
Installation position influence
The change of the installation position parallel to and reverse to the membrane one side will not cause the influence of zero drift. If the change of the installation position and the membrane one side exceeds 90 °, there will be the influence of zero position within the range of < 0.15kpa, and the range will not be affected.
output
2-wire system, 4-20madc, 485 communication can be added.
Output signal limit: 1min = 3.8ma, Lmax = 22mA
Response time: < 0.2S
Preheating time: < 15s
Ambient temperature: - 20 ~ 100 ℃
Storage temperature / transportation temperature: - 40 ~ 125 ℃
Medium temperature: - 30 ~ 120 ℃
Pressure limit: from vacuum to maximum range.
Overload limit:
3, installation
Power supply and load conditions:
The power supply voltage is 24V, R (us-12v) / Lmax KQ,
Where Lmax = 23ma
Maximum supply voltage: 36VDC
Minimum supply voltage: 10VDC
Electrical connection
Hesman connector, terminal suitable for 0.5-2.5mm2 conductor.
Process connection:
Standard process connection: DN25 / Dn40 / DN50 sanitary interface.
4. Physical specifications
Texture of material
Diaphragm: stainless steel 316L, Hastelloy
5. Model and specification code table
Selection of sanitary gauge pressure transmitter fl102-s
Selection of sanitary absolute pressure transmitter fl103-s
12
accuracy
D basic error ± 0.25%
1 [2]
Gauge pressure fl102-sd
C1 0-0.25 bar
C2 0-0.4 bar
C3 0-0.6 bar
D1 0-1 bar
D2 0-1.6 bar
D3 0-2.5 bar
F1 0-4 bar
F2 0-6 bar
F3 0-10 bar
F4 0-16 bar
F5 0-25 bar
F6 0-30 bar
C5 -1-1.6 bar
D4 -1 -0.6 bar
D5 -1-1.6 bar
F8 -1-3 bar
F9 -1-5 bar
FA -1-9 bar
FB -1-15 bar
FC -1 -24 bar
FD -1 -29 bar
SG special gauge pressure m range
Absolute pressure er103-sd
M1 0-1.0 bar
M2 0-1.6bar
M3 0-2.5 bar
01 0-4 bar
02 0-6bar
03 0-10 bar
04 0-16 bar
05 0-25 bar
SA special absolute pressure range
Diaphragm material filling liquid
A stainless steel 316L
silicone oil
C Hastelloy C
silicone oil
X stainless steel 316L
Vegetable oil
Y Hastelloy C
Vegetable oil
Process connection
A sanitary interface DIN 32676 DN25 / ISO 2852 DN 25
B sanitary interface DIN 32676 Dn40 / ISO 2852 DN 38
C sanitary interface DIN 32676 DN50 / ISO 2852 DN 51
Additional options L3)
1 Test Report
2 Material Report
3 additional 485 communication interface
Note 1: fl102 corresponds to the gauge pressure range code, and fl103 corresponds to the absolute pressure range code;
Note 2: correspondence between process connection and applicable range:
Note a / D additional specification selection code
Process connection code
M program code (initial}
A
C、D、M、0、F
B
C、D、M、0、F
C
C, D, M
Chi long is old and gloomy
ZHAOLONG ELECTRICS zhaolong
2345
Examples of options:
Example: fl102-sdc1aa2
[fl102-s]: sanitary gauge transmitter
[D] : basic error ± 0.25%
[C1]: 0 -. 25bar
[A] The liquid receiving part is 316L stainless steel diaphragm, and the filling liquid is silicone oil
[A] : sanitary interface DIN 32676 DN25 / is02852dn25
[124]: test report + material report + 485 communication function
Note 3: additional options are optional or multiple.