Product Name: fl102-d gauge transmitter fl102-d gauge transmitter
Product No.: 101144-707
Product model: fl102-d
Updated on: September 14, 2017
Production unit: [thermocouple] - Shanghai Feilong instrument and Electrical Co., Ltd. 021-63801621
Product details
Fl102 / 3-D gauge pressure / absolute pressure transmitter is used to measure liquid level, density and pressure of liquid, gas or steam, and then convert it into current signal output of 4 ~ 20mADC.
Standard specification: (with standard zero point as the benchmark, adjust the process, stainless steel 316L diaphragm, and the filling liquid is silicone oil)
1. Performance specifications
Reference accuracy of range adjustment: ± 0.25%
Return difference: ≤ 0.15% F.S
Repeatability: ≤ 0.15% F.S
Zero drift: < 0.15% F.S
Thermal hysteresis: < 0.1% F.S
Impact of ambient temperature
Temperature compensation range: 0-80 ℃
Zero point: < 0.025% ℃
Range: < 0.025% ℃
Over range impact: ± 0.15% xspan
Stability: ± 0.5% xspan / 3 years
Power supply impact: ± (0.005% / 10V (12-42v DC)
2. Functional specifications
Setting and range
Installation position influence
The change of the mounting position s parallel to and reverse to the membrane one side will not cause the influence of zero drift. If the mounting position and the membrane one side change more than 90 °, there will be the influence of zero position within the range of < 0.15kpa, and the range will not be affected.
output
2-wire system, 4 ~ 20mADC, can load 485 communication.
Output signal limit: 1min = 3.8ma, Lmax = 22mA
Response time: < 0.2S
Preheating time: < 15s
Ambient temperature: - 20 ~ 100 ℃
Storage temperature / transportation temperature: - 40-125 ℃
Medium temperature: - 30 ~ 120 ℃
Pressure limit: from vacuum to maximum range.
Overload limit:
3, installation
Power supply and load conditions:
The power supply voltage is 24V, R ≤ (us-12v) / Lmax K Ω,
Where Lmax = 23ma
Maximum supply voltage: 36VDC
Minimum supply voltage: 10VDC
Electrical connection
Hesman connector, terminal suitable for 0.5-2.5mm2 conductor.
Process connection:
Standard process connection: NPT 1 / 2 external thread (including npt1 / 4 internal thread), m20x1.5 external thread, G1 / 2 external thread, kf16 vacuum interface.
4. Physical specifications
Texture of material
Diaphragm: stainless steel 316L, Hastelloy C
Process connection: stainless steel 316
Filling liquid: silicone oil, vegetable oil
Transmitter housing: stainless steel 304
Shell seal ring: NBR weight: 0.2kg
Enclosure protection grade: IP65
7. Model and specification code table
Model selection of gauge pressure transmitter fl102-
Selection of absolute pressure transmitter fl103-
accuracy
D basic error ± 0.25%
range
Gauge pressure er102-d
C1 0-0.25 bar
C2 0-0.4 bar
C3 0-0.6 bar
D1 0-1 bar
D2 0-1.6bar
D3 0-2.5 bar
F1 0-4 bar
F2 0-6bar
F3 0-10 bar
F4 0-16 bar
F5 0-25 bar
F6 0 - 30bar
F7 0-40bar
G1 0-60 bar
G1 0-100 bar
H1 0-160 bar
H2 0-250 bar
H3 0-400 bar
C5 -1-0 bar
D4 -1-0.6 bar
D5 -1-1.6 bar
F8 -1-3 bar
F9 -1-5 bar
FA -1-9 bar
FB -1-15 bar
FC -1-24 bar
FD -1-29 bar
FE -1-39 bar
SG special gauge pressure m range
Absolute pressure er103-d
M1 0-1.0 bar
M2 0-1.6bar
M3 0-2.5 bar
01 0-4 bar
02 0-6bar
03 0-10 bar
04 0-16 bar
05 0-25 bar
SA special absolute pressure m pass
Diaphragm material filling liquid
A stainless steel 316L
silicone oil
B stainless steel 316L
Fluorine oil
C Hastelloy C
silicone oil
D Hastelloy C
Fluorine oil
Process connection form
1 1 / 2 "NPT female
2 1 / 2 "NPT male (includes 1 / 4" NPT)
3 m20x1.5 external thread
4 g 1 / 2 male
5 vacuum interface din28403kf16 / ISO 2861 [2]
6 1 / 4 "NPT male
Additional options
1 Test Report
2 Material Report
3 additional 485 communication interface
Examples of options:
Example: fl102-dc122
[fl102 -]: gauge pressure transmitter
[D] : basic error ± 0.25%
[C1]: M range is 0.25bar
[A] The liquid receiving part is 316L stainless steel diaphragm, and the filling liquid is silicone oil
[2] : 1 / 2 "NPT male (process with 1 / 4" NPT included
Connection interface
[2] : Material Report
