|
|
Electric heating tube series
Product Name: electric heating pipe series
Product No.: 183644-810
Product model: 0
Manufacturer: thermo couple -- Shanghai Feilong instrument & Electrical Co., Ltd
Product details
Instructions for use of tubular electric heating elements
1. Components are allowed to operate under the following conditions
(1) The relative humidity of air shall not be more than 95%;
(2) The working voltage shall not be more than 1.1 times of the rated value, and the enclosure shall be effectively grounded.
2. When the heating medium is liquid, the effective length (H1 or L1) of the element must be completely immersed in the liquid. The heating part of the element shall be at a certain distance from the vessel wall, generally more than 50-60mm.
3. Elements for heating liquids shall not be used to heat gases or solids.
4. If any scale or carbon deposit is found on the surface of the heating liquid element, it shall be cleaned before use, so as not to affect the service life of the element and reduce the thermal efficiency.
5. When smelting light metals or nitrates, alkalis, asphalt, paraffin, etc. are solid, heating shall be carried out, and the pressure shall be reduced to start, and the solid heating medium can only be raised to the rated voltage after melting.
Heating element for air conditioning
Nickel plating series
JGA series air heating elements with warping sheet series
The maximum allowable operating temperature is 400 ℃. A minimum air flow rate of 3 M / s through the surface of the heating tube is recommended.
The basic structure of continuous spiral stainless steel warped piece is fixed on the surface of 16mm diameter tubular element by copper welding, with warped piece diameter of 6.8mm and spiral pitch of 3.5mm.
The fastener fastener is a 22x1.5x45 threaded joint welded on the tube wall of the element end.
Tubular electric heating element for JGO air:
Jgq tubular electric heating element is made of 10 steel with the highest medium temperature of about 300 ℃. It is suitable for all kinds of air heating systems, and can be used as heating elements of various ovens, drying channels and electric furnaces.
JGS type tubular electric heating element for water:
JGS tubular electric heating element for water is suitable for heating in open and closed flume and circulating water system. The highest medium temperature is 105 ℃, jgsl (4) pipe is No. 10 steel, jgs3 (5) pipe is copper.
Tube electric heating elements for jgx nitrate solution and JGJ alkali solution:
Jgx tubular electric heating element is made of stainless steel, which is suitable for heating nitrate solution; JGJ tubular electric heating element is made of 10 steel, which is suitable for heating alkali solution; the maximum medium temperature is 500-550 ℃
Jgy tubular heating element:
Jgy tubular electric heating element is suitable for heating devices of various equipment, and the pipe material is No. 10 steel. Jgy2 (3) is used for heating in open or closed oil tanks, with the maximum medium temperature of 300 ℃. Jgy4 is used for heating circulating oil with the highest medium temperature of 100 ℃. The working pressure of jgy2 (4) type shall be less than 5kg / cm2, and the mounting hole shall be f72mm
Single head electric heating pipe series
1、 Product classification:
The conventional single head electric heating tube is generally divided into two types: high power density (external area power of electric heating tube in the heating area is 12-25w / cm '); medium and low power density (external area power of electric heating tube in the heating area is 5-11w / cm 2) and working temperature ~ < 300 ℃.
2、 Product use and scope of application:
The conventional single head electric heating tube is suitable for: plastic packaging, small mold heating, analytical instruments, cigarette industry, shoemaking industry, semiconductor eutectic welding, die-casting input channel heating and cooling effect without sprue injection and gas expansion.
The shell material of jgm3 electric heating element is stainless steel, which is suitable for working in heating medium without wiring at both ends. The maximum working temperature is 300 ℃. This model is mainly used for heating metal mold
Thread mounted single head electric heating pipe
Structure: a male (British) hollow bolt with hexagon head (for fastening) of different sizes (to be determined by the customer) is welded on the wiring part of single head electric heating pipe. It can also be divided into two types: upward and downward.
Application: it is widely used for heating all kinds of liquid materials, and can bear pressure of ~ > 0.8MPa.
High density single head electric heating tube
Features: fast temperature rise, working temperature ≤ 450 ℃. Uses: plastic molding die, C02 pressure reducing assembly, cigarette machine, quick sealing machine, pharmaceutical machinery, etc.
Voltage: 36-250v
Power: 10-20w / cm2 (effective heating area surface area)
Corrosion resistant single head electric heating pipe
Structure: the anticorrosive metal tube (usually titanium or ceramic) is used as the outer tube of components. The terminal is molded with corrosion-resistant rubber plastic composite material.
Application: widely used in mariculture, chemical industry and field work
Voltage: 110-440v
Power: < 10kW / PC
Right angle lead single head electric heating pipe
Features: convenient and reliable installation.
Application: metal mould or machine parts
Voltage: 12-440v
Power: to be determined by the customer
Controllable temperature single head electric heating tube
Structure: a temperature control element (J, t, K, e or thermistor can be selected for graduation) is installed in the single head electric heating tube.
Application: it is widely used for heating in occasions with high temperature error requirements,
If the customer needs to heat up quickly, the electric power can be increased.
報錯
NOTHINGNOTHING
Title:Model and specification of assembled platinum thermistor |
Introduction:...... [More] |
|